2012 Chevy Camaro Oil Pan Removal

I just bought a 2017 SS Camaro and it looks like the Exxon Valdeze pulled into my driveway.

2012 chevy camaro oil pan removal. If you dont have an engine hoist Just pull the engine mount bolts and then you can put some foam and a block on the oil pan and lift it with a jack. New gasket held in place with sealant Use a blunt screwdriver -if needed - and prise the oil pan free. The oil pan stradles the kmember so you have to at least raise the motor up 4 to slide the oil pan out.

The old oil pan looks like it was used to jack the car up at one point. Mechanic comes to you. Terry Willson coverman66 gives us a good idea about how to tackle this type of problem while changing the oil pump in a Trailblazer SS without removing the engine.

Aftermarket brace for oil tube and oil pan baffle are some other while your there ideas. The oem gasket is riveted to the oil pan so you will have to remove those rivets. Dont have to remove the engine but it is obviously easier to replace the pan with the motor out.

12-month 12k-mile warranty. Sunex 8 mm to 17 mm Oil Drain Plug Socket Set. Dont pry between the pan and block or you could damage the sealing surfaces.

Disconnect the battery ground cable. Labor costs are estimated between 617 and 778 while parts are priced at 361. Detach the oil pan from the van by removing its bolts.

Its a somewhat tedious process but will ultimately save you time and energy when compared to having to remove the power plant. Yes you need to lift it a bit. All the products made by this stringent quality control conditions.