2012 Chevy Camaro Oil Light Reset
To begin with you must change the key position to 2.
2012 chevy camaro oil light reset. If you have any questions feel free to comment below please like. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. The Chevrolet Oil Life Monitor OLM system is not a simple oil quality sensor but a software-based algorithm-driven device that takes into account various operating conditions of the engine to determine when the oil.
This will reset the computer and all should be back to normal. How the Chevrolet Oil Life Monitor OLM system works and what to expect. It cannot be reset accurately until the next oil change.
Turn the ignition to run one position before starting engine. Turn the ignition to run one position before starting engine. Then turn the ignition to the off position and then start the engine.
Turn the ignition off. TURN the Ignition OFF Oil reset is Complete. Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds.
Turn the key to the OFF position and back on to confirm reset successful. When the DIC prompts you use the thumbwheel to. However it is not necessary to step on the accelerator and start the car in the first step.
If the Change Engine Oil Soon indicator is off then the light has been reset. Press the Set button until the DIC display shows oil life at 100. Press the OPTION button on the DIC until Engine Oil Monitor appears on the screen.